Pallet Circulation TypeOMNI LIFTER (PL Type)

Summary and Features

OMNI LIFTER (PL Type)

Description of Loading

Corresponding Transports

  • Pallets
  • Carts
  • Rolled Paper
  • Forklifts

Circulation system.
Dedicated pallet circulation type vertical conveyor.

Catalog PDF Download

Reduces running costs

Instead of the normal twelve annual inspections to which elevators are normally subject, the Omni Lifter PL Type needs only four voluntary self-inspections a year, cutting running costs dramatically.

High operating efficiency

A special pallet is always waiting at the loading gate, allowing constantly smooth loading and unloading. Special pallet movement is also completely automatic to ensure better safety.

No construction permit required

Unlike elevators, installation of the OMNI LIFTER PL Type does not require application for a construction permit.

Pallets and carts can be transported together.
Also allows combined use of forklifts and handlifts.
Absolutely no need to adapt carts.

OMNI LIFTER PL Type installation

Main Devices

Equipment layout diagram

1. Checking device for
a figure of products

This device checks a protrusion of the products and prevents an accident.

Checking device for a figure of products

2. Two steps auto feeding device

It is quite safe because products on a pallet move automatically to a lifter conveyor.

Two steps auto feeding device

3. Loading plate
with lifting function

The lifter repeats to go up and down.
Products on a pallet will be carried in and vacant pallet will be carried out.

Loading plate with lifting function

4. Standard control box
(Touch panel)

 

Standard control box (Touch panel)

Cases

  • Introduction case: After
  • Introduction case: After

Specifications and Drawings

Model 3PE-H-6-10-PL
Max. Cargo Weight 1,000kg
Cart Dimensions 800W×600L×1,800H (2 each)
Pallet Dimensions 2,000W×1,200L×60H (Special Pallet)
Loading Method Manual push
Loading Orientation Load and unload from front
Conveyance Capabilities 1F-2F:70 Pt/hour; 1F-3F:50 Pt/hour
Conveyance Speed 50m/min
Lifting Power 11kW
Table Dimensions 2,420W×2,000L
Lateral Speed 24m/min, inverter controlled
Lateral Drive Power 0.75kW、4P、GM
Loading Mechanisms 2 per floor, 6 total

(Unit: mm)

【Additional Work Requirements】

1. Run primary power supply to the 3F control panel
(3φ、200V、50Hz、30.7kW)
2. Each floor – Install smoke shutters (3 sides)
3. Conveyance passage-Fire protection sectioning off
4. Wire emergency controls for fire outbreak signal (24V DC)
5. Upper conveyance passage-Install construction-use lifting hook (3each, 2-ton capacity)
6. Upper conveyance passage – Install lighting (40W)
7. Upper conveyance passage – Install pressurized exhaust fan with 40°C thermocouple switch and anti-fire/anti-smoke damper
8. 3F – Install 100V electrical outlets
9. 3F – Install inspection door
10. 1F – Construction of base for main unit, pit construction (concrete), and opening of floors on each level
11. Run temporary power lines for use during construction
12. Install anti-harmonic measures
13. Other-General construction related to structure, electrical, equipment, and anti-disaster measures

Special Pallet Reference Dimensions

Width 2,500W・2,100W・1,800W
Depth 1,600L・1,500L・1,400L

Special Pallet Dimensions, 9 patterns

Dimensions 2,500W×1,600L 2,500W×1,500L 2,500W×1,400L
2,100W×1,600L 2,100W×1,500L 2,100W×1,400L
1,800W×1,600L 1,800W×1,500L 1,800W×1,400L

(Unit: mm)

Drawing PDF Download